Speak to an expert
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
<span class="article__meta">Written by</span><p class="author__name"><a href="https://www.cbheating.co.uk/author/james-enderby/" target="_self">James Enderby</a></p>

James Enderby

Avatar photo

Jamie Ansell

Reading Time:

How Loud Is An Air Source Heat Pump?

If you’re concerned about how loud an air source heat pump is, you might be surprised to instead find out how quiet they are. Like any machine in operation, heat pumps do produce noise – but how much noise they produce is remarkably low, especially with newer ASHP models designed with a focus on low-noise operation.

The noise is so low, in fact, that it’s about the same as a whisper, the gentle hush of a library, or the sound of a breeze through leaves.

But if you’re curious to learn how a heat pump produces noise and how much noise it produces, read on.

Why do heat pumps produce noise?

Air-to-water heat pumps, like the ones we install, are essentially neat replacements of gas boilers in a normal domestic application – that is, you don’t have to replumb your whole house and can, in most cases, connect to your existing heating pipes.

They extract heat from the air outside your home and use that heat to warm up water and radiators – so you can stay snug all year round.

The main element that produces noise in an ASHP is the fan that’s used to draw air over a refrigerant element. This fan runs at varying speeds depending on the heating needs of your home, but it also doesn’t run all the time.

How much noise does a heat pump make?

As part of our bespoke system design service, we always opt for the model that we’ve learned will give you the best result, but noise is always factored in – so that you can stay warm peacefully.

The models we work with roughly have a sound pressure level of 38dBA at three metres away when operating in Standard Sound Mode – which is somewhere between birds chirping at a distance and the quiet hush of a library. This is significantly quieter, for example than a cooker extraction hood on a low setting.

If you turn them onto Low Sound modes, this usually halves the sound pressure (which often more than halves the perceived volume) – though this can make the ASHP less efficient and is usually unnecessary.

In fact, one of our trusted manufacturers, Ideal, have had their Logic Air models officially rated among the quietest in the UK by industry-standard certification company Quiet Mark

For context, the volume of a gas boiler ranges between 30-60dB. So if you’re content with the volume of your gas boiler, you’ll likely not even notice the volume of your new air source heat pump – and neither will your neighbours!

It’s also worth bearing in mind that the times that heat pumps run at the highest volume is when they need to work harder to extract heat from the outside air. This is almost always in the depths of winter when you and your neighbours aren’t often outside anyway.

The only noise that you’ll get inside your home is, usually, the noise of radiators heating up – which is no different from what you’d likely have become used to with a gas boiler.

This is likely to be much less frequent (or non-existent) because your radiators will stay at a constant temperature rather than the constant cycling you tend to get with gas boilers.

Are heat pumps too loud for MCS accreditation?

Not at all, every one of our installations is MCS registered and we go to great lengths to make sure they’re all accredited. Before the installation, we carry out an in-depth noise assessment for the unit itself in order to meet permitted development requirements.

How to minimise heat pump noise

The main way to mitigate heat pump noise, in much the same way as a gas boiler, is to run it efficiently.

But this isn’t something that is even considered once the heat pump has been installed and is running – they operate so quietly that you generally forget they’re even there.

We’ll advise as part of the system design a good installation spot to minimise noise from the outdoor unit. And our installers will also leave you with efficient settings that stop frequent heat pump cycling – an efficient, consistent system design helps the heat pump unit to not have to work as hard when heating your home.

Are there any noise regulations during a heat pump installation?

Usually, no heavy machinery needs to be used for a heat pump installation other than, occasionally, a powered masonry drill to run the pipework into your home. The outdoor unit is usually installed within a day’s work, with the rest of the project taking place inside your home.

However, there certainly are regulations for how loud a heat pump can be after it’s been installed. So every one of our installations has a detailed noise assessment carried out & certified with MCS.

Our bespoke system report explains everything

Before any installations even begin, you’ll have had plenty of detailed conversations with our team and will have seen all the plans.

Our system designers provide clear & detailed guidance on every aspect of the installation. As part of a report, you will also receive a copy of the noise level assessment approved by MCS.

 

Share this article